Filter
Top Products
45
RF350U (E/F) Web 213:276
Chapter 5: Setting up your TV
6 Highlight Yes and press T. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the reset process.
To cancel the reset:
Highlight No and press T.
Selecting the Blue LED Illumination
level
You can adjust the brightness of the blue LED located on the
front panel (High, Middle, or Low).
To set the Blue LED Illumination level:
1 Press Y, and open the Setup menu.
2 Highlight Blue LED Illumination and press c.
3 Press B or b to select your desired illumination level.
Selecting the Power-On Mode
You can select either Power-Saving or Fast mode.
• Power-Saving mode keeps power consumption in standby
mode to below 3W. As a result, it takes a bit longer for the
TV to turn on.
• Fast mode increases power consumption in standby mode.
As a result, the TV will turn on more quickly. While in Fast
mode, the yellow LED on the front of the TV will be lit.
To set the Power-On Mode feature:
1 Press Y, and open the Setup menu.
2 Highlight Power-On Mode and press c.
3 Press B or b to select either Power-Saving or Fast and
press T.
System Information
Press YES to confirm. After the TV
turns off, unplug it and plug it back
in to complete the reset.
YesNo
Installation
CE-Link Setup
Blue LED Illumination High
Setup
Sleep Timer
PC Settings
HDMI Settings
Power-On Mode Power-Saving
High
Middle
Low
Installation
CE-Link Setup
Blue LED Illumination High
Setup
Sleep Timer
PC Settings
HDMI Settings
Power-On Mode Power-Saving
Power-Saving
Fast
40RF350U_EN.book Page 45 Tuesday, August 7, 2007 10:59 AM