Toshiba SD-360ESE DVD Player User Manual


 
21
Connections
Notes
Refer to the owner’s manual of the connected TV as well.
When you connect the DVD video player to your TV, be sure
to turn off the power and unplug both units from the wall outlet
before making any connections.
If you have a HDMI (with HDCP) equipped monitor or display,
you can connect it to this player using a HDMI cable.
The HDMI connector outputs uncompressed digital video, as
well as almost every kind of digital audio that the player is
compatible with, including DVD-Video, Video CD/Super VCD,
CD and MP3.
This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface) Version 1.1 depending on the
component you have connected. Using a HDMI connection
may result in unreliable signal transfers.
When using HDMI cable, do not connect to other analog video
outputs.
No sound will be output from the HDMI cable if the digital out
is not set to PCM
61
.
HDMI output is only available when the Video Output is set to
“HDMI”. Otherwise the HDMI button is invalid
59
.
Content of the output for each output jack is shown in the followin
g
table
and differ dependin
g
on the On-Screen Display Settin
g
:
"Video Output" HDMI Output HDMI Video Component AV
Setting Setting * Output Output Output Output
RGB Invalid - Composite - RGB
Composite Invalid - Composite - Composite
Component Invalid - Composite 576i Composite
(Interlaced)
P-Scan Invalid - Composite 576p Composite
(Progressive)
576p 576p Composite 576p Composite
HDMI 720p 720p - - -
1080i 1080i - - -
* Settin
g
s for HDMI output format are performed usin
g
the HDMI button
on the remote control.
Content of output for each output jackOn-Screen Display Setting