Filter
Top Products
27
Basic playback
To pause playback (still mode)
Press PAUSE/STEP during playback.
To resume normal playback, press
the PLAY button.
• The sound is muted during still mode.
To stop playback
Press STOP.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Be sure to press the OPEN/CLOSE button to close the
disc tray after you remove the disc.
To turn the power off (To enter the standby mode)
Press ON/STANDBY to turn the unit to standby mode.
Note
Be aware that this equipment is still powered even on standby
mode. To disconnect this equipment completely from the main
power, pull out the power plug from the wall outlet.
About the screen saver
When you leave the unit in DVD stop mode for
approximately 2 minutes, the screen saver of the DVD
video player automatically appears. To turn off the screen
saver, press the PLAY button.
Automatic Power Off function
If the DVD video player is stopped, or the screen saver is
engaged for approximately 20 minutes, the DVD video
player will automatically turn itself off.
Notes
• Do not move the DVD video player during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause
the DVD video player to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video player
to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu
may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press the STOP
button on your remote control once the movie is completed.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast may
appear on the TV screen while playing a DVD video disc because the high resolution
pictures on these discs include a lot of information. While the amount of noise depends
on the TV you use with this DVD video player, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
About
The icons on the heading bar show the playable discs for the function
described under that heading.
DVD
: You can use this function with DVD video discs.
: You can use this function with VIDEO CDs.
CD
: You can use this function with audio CDs.
2, 4
1
STOP
PLAY
PAUSE
MENU
ENTER
TOP MENU
E-25-32.pmd 3/10/2006, 9:43 AM27