Filter
Top Products
60
Function setup
HD Jpeg Mode
1) Press SETUP button.
2) Press
/ button to select the Video.
3) Press
button, then the / button to select
the HD Jpeg Mode.
4) Press ENTER button, then the
/ button to
select the output mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
On: JPEG image is displayed in a suitable picture
quality (480p/576p, 720p or 1080i)
20
.
Off: The picture quality is fixed to 480p/576p.
Note
If the Video Output is not set to “HDMI”, you cannot
select the “HD Jpeg Mode”.
JPEG Interval
1) Press SETUP button.
2) Press
/ button to select the Video.
3) Press
button, then the / button to select
the JPEG Interval.
4) Press ENTER button, then the
/ button to
shift and change the JPEG Interval.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Off: Plays back one file at a time.
5 seconds: Plays back images in the form of a slide
show at 5 seconds interval.
10 seconds: Plays back images in the form of a slide
show at 10 seconds interval.
15 seconds: Plays back images in the form of a slide
show at 15 seconds interval.
Customizing the Function Settings (continued)
Setting details
HD Resolution
1) Press SETUP button.
2) Press
/ button to select the Video.
3) Press
button, then the / button to select
the HD Resolution.
4) Press ENTER button, then the
/ button to
shift and change the HD resolution.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Note
• Supported HD JPEG Mode:
480p/576p, 720p, 1080i.
• If the Video Output is not set to “HDMI“, you cannot
select the “HD Resolution”.
E-54-65R.pmd 3/10/2006, 10:01 AM60