Filter
Top Products
- 15 -
ENG
COMPONENT VIDEO (YPBPR) / PROGRESSIVE SCAN & CONNECTION
Component Video (YPBPR) output jacks can be used to have the best picture quality. Your TV set must have component
video (YPBPR) input connectors for this type of connection. These jacks are used for only video connection. For audio,
red & white output jacks must be used.
• If you have a “high-definition” or “digital ready” TV, you may take advantage of the DVD Player’s progressive scan output
for the highest video resolution possible.
• Select the Progressive Scan mode by choosing “PROGRESSIVE” on the VIDEO OUTPUT menu, see page 29.
• If your TV does not accept the Progressive Scan format, the picture will appear scrambled when you try Progressive
Scan on the DVD Player.
1. Connect the COMPONENT VIDEO OUT jacks on the DVD Player to the corresponding IN jacks on the TV using the
YPBPR cable.
2. Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio Left and Right IN jacks on the TV using
the audio cables.
35016286
Component Video Cable
(commercially available)
Audio (Left / Right) Cable
(commercially available)
Y
P
B
P
R
COMPONENT VIDEO INPUT
LEFT
RIGHT
AUDIO INPUT
¥ NOTE:
• When using the component video cables (YPBPR), do not connect the Scart socket.