Filter
Top Products
- 21 -
ENG
DIRECT SELECTION OF SCENES
Selecting Scenes by Chapter Number
Press SEARCH on the remote control once during
playback.
The chapter/title search box is displayed on the screen. You
can see the total number of chapters as -/xx.
Enter the chapter number using number buttons.
The selected chapter is played just after you enter the
chapter number digits.
You can clear the field by pressing the CLEAR button if you
enter two digits number wrong.
You can press RETURN button to cancel chapter search.
¥ NOTE:
•If you attempt to enter a number greater than the total
number of chapters on the current title, the search box
disappears and
“
symbol appears on up-left corner of
screen.
• If you wait for ten seconds without pressing any button
for selecting scenes by chapter number, the operation is
cancelled.
Selecting Scenes by Title Number
Press SEARCH on the remote control once during
playback.
The chapter/title search box is displayed on the screen.
Press 3 button on the remote control to select the title field
in the search box to change the title.
You can see the currently playing title and total number of
titles as -/xx.
Enter the number of the title using number buttons.
The selected title is played just after you enter all the title
number digits.
You can clear the field by pressing the CLEAR button if you
enter wrong number.
You can press RETURN button to cancel title search.
¥ NOTE:
• If you attempt to enter a number greater than the total
number of titles, the search box disappears and
“
symbol appears on up-left corner of screen.
• If you wait for ten seconds without pressing any button
for selecting scenes by title number, the operation is
cancelled.
Selecting Scenes by Time
You can view the DVD starting from any time point you
want.
Press SEARCH on the remote control twice during
playback.
The time search box is displayed on the screen. You can
see the total elapsed play time of the title as --:--:--/xx:xx:xx
Enter the time using number buttons.
The title is played beginning from the desired time just after
you enter the time, if not prohibited by the DVD.
You can clear the fields by pressing the CLEAR button if
you enter wrong numbers.
You can press RETURN button to cancel time search.
¥ NOTE:
• If you attempt to enter a number greater than the total time
of the current title, it will cancel the operation.
• If you wait for ten seconds without pressing any button
for entering time, the operation is cancelled.
REPEAT PLAY
Repeat Viewing
Press PLAY MODE during playback.
Each time this button is pressed, a different repeat box is
displayed on the screen.
If “CHAPTER REPEAT ON” is displayed, the current
chapter will be played again.
If “TITLE REPEAT ON ” is displayed, the current title will
be played again.
If “REPEAT OFF” is displayed, the repeat mode is disabled.
¥ NOTE:
• Repeat play may be prohibited by some DVD titles.
Repeating a section between two specific points
(A – B repeat)
Press A-B RPT during playback at the point where repeat
play is to commence (A).
“ A TO B SET A ” is displayed.
Press A-B RPT again at the point where repeat play is to be
concluded (B).
“ A TO B SET B ” is displayed and the repeat play of the
selection between points A and B starts, if not prohibited
by the DVD.
To return to normal play:
Press A-B RPT again. “A TO B CANCELLED ” is displayed
and the A-B Repeat is disabled.