Filter
Top Products
14
Connecting
your TV
Connecting an audio system
This connection allows you to use external speakers with an external
audio amplifier to adjust the sound level.
To control the audio:
Turn on the TV and the stereo amplifier.
Turn off the TV’s built-in speakers (see “Turning off the built-in
speakers” on page 38).
Note: To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set to a reasonable
listening level.
You will need:
• one pair of standard audio cables
LINE IN
LR
Back panel of TV
Amplifier
AV Amplifier with built-in digital surround
Center Speaker
Front
Speaker
(Left)
Front
Speaker
(Right)
Subwoofer
Surround Speaker
(Left)
Surround
Speaker (Right)
TV
You will need:
• one coaxial digital cable
• Six sets of speaker cables
The COAXIAL DIGITAL AUDIO OUT jack outputs digital audio only during digital broadcasts with digital audio. To hear analog
broadcast audio, you also must connect analog audio cables from the L/R ANALOG AUDIO jacks to the receiver’s inputs.
Consult the owner’s manual for your receiver to determine the best way to switch between the analog and digital signals.
This connection allows you to use an audio amplifier with built-in
digital surround and external speakers.
See “Selecting the digital output format” on page 39.
Connecting an A/V amplifier with built-in digital surround
Note:
Refer to the Owner’s manual of the audio
amplifier as well.
Back panel of TV
J3W60321A_En_p07-14 27/2/06, 9:54 AM14