Filter
Top Products
37
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
Using the surround sound feature
The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV’s speakers. The
feature uses stereo signals from a TV broadcast or video input.
To turn on the surround sound feature:
1. Select the STEREO mode following the steps under “Selecting
stereo/SAP broadcasts” on page 29.
2. Press MENU, then press
x or • until the AUDIO menu appears.
3. Press
y or z to highlight SURROUND.
4. Press
x or • to highlight ON.
MTS:
BASS
TREBLE
BALANCE
SURROUND:
SELECT[ ]
[STR]SAP MONO
–-------|-------+
–-------|-------+
–-------|-------+
ON[OFF]
AUDIO
PREFER
SET UP
C.CAPT
PICTURE
To turn off the surround sound feature:
Choose OFF in step 4 above.
In general, you should leave your TV set to SURROUND so it
can automatically produce surround stereo or monaural sound,
depending on the broadcast type.
Viewing the demonstration mode
The demonstration mode (DEMO) is an option available on the
SET UP menu. If you select this mode, the TV will demonstrate
several of the TV’s features.
To stop the demonstration mode:
Select DEMO STOP in the SET UP menu, or press the
RECALL, EXIT, or POWER buttons.
Understanding the last mode memory feature
If the power is cut off while you are viewing the TV and the power
is resupplied, the last mode memory feature will turn the TV on
automatically.
If the power is going to be off for a long time or you are going to be
away from home for a long time, remove the power plug from the wall
outlet to prevent the TV from turning on in your absence.