Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
31
32/36AFX61(E)
Using the LOCKS menu
The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and
New PIN Code functions. You can use these functions after entering
the correct PIN code.
Entering the PIN code
1. Press MENU, and then press x or • until the LOCKS menu
appears.
LOCKS
VCHIP–
V
NEW
CH LOCK
PIN
I LOCK
CODE
DEO
ENABLE
TV RAT
MPAA
ING
RATING
BLOCKING
BLOCKING OPTION
OFF
OFF
2. Press y or z to display the pin code entering mode.
RECALL
MENU/
ENTER
yzx •
Channel
Numbers
• Factory reset status:
Set your 4-digit code by pressing
the Number buttons (0–9).
• When the PIN code is already
stored:
Press the Channel Number
buttons (0–9) to enter the
4-digit PIN code used for
blocking channels.
LOCKS
BLOCK NG RESETI
P I N CODE
1110
LOCKS
BLOCK NG ACTIVEI
P I N CODE 1234
If a wrong PIN code is entered, the message “Incorrect” will
appear. Enter the code again.
If you cannot remember the PIN code you stored, while you are
in the PIN code entering mode, press RECALL four times within
5 seconds. The PIN code you stored will be released (returned to
factory reset status).
3. Press ENTER to display the LOCKS menu.
LOCKS
VCHIP–
V
NEW PIN
I LOCK
CODE
DEO OFF
ENABLE
TV RAT
MPAA
ING
RATING
BLOCKING
BLOCKING OPTION
ON/OFF
CH LOCK
Continue to set each item following the steps on the next page.