Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
6 32/36AFX61(E)
Connecting a cable converter box
This connection allows you to watch cable and premium channels.
To use the TV’s features, select ANT-1. To view premium channels,
select ANT-2 and tune the TV to channel 3 or 4 (whichever channel is
vacant in your area), then use the converter box to change channels.
You will need:
• two coaxial cables
Cable converter box
IN OUT
ANT
(
75
)
ANT-1 OUT ANT- 2
ON OFF
CHANNEL IN
AUDIO CENTER
OUT
RL
VAR
AUDIO
OUT
VIDEO
L/
MONO
AUDIO
R
IN
DVD IN
C
R
C
B
Y
L/
MONO
AUDIO
S-VIDEO
VIDEO
R
VIDEO 1 VIDEO 2
COLOR
STREAM
AUDIO
R
L
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, watch videotapes, and record one TV channel while
watching another TV channel. To use the TV’s features, select ANT-1.
To view premium channels or record with the VCR, select ANT-2,
change the TV channel to 3 or 4 (whichever channel is vacant in your
area), and then use the converter box to change channels.
You will need:
• one two-way cable signal splitter
• three coaxial cables
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable (one S-video cable for an S-VHS VCR)
IN from ANT OUT to TV
CH 3
CH 4
VIDEO
AUDIO
LR
IN
OUT
ANT
(
75
)
ANT-1 OUT ANT- 2
ON OFF
CHANNEL IN
AUDIO CENTER
OUT
RL
VAR
AUDIO
OUT
VIDEO
L/
MONO
AUDIO
R
IN
DVD IN
CR
CB
Y
L/
MONO
AUDIO
S-VIDEO
VIDEO
R
VIDEO 1 VIDEO 2
COLOR
STREAM
AUDIO
R
L
OUT
IN
Cable converter box
IN
OUT
OUT
two-way cable signal
splitter
Note:
When you use a converter box with your TV,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use an S-video
cable (in the S-video jacks) instead of a
regular video cable. Do not connect both a
regular video cable and an S-video cable to
Video-1 (or Video-2) at the same time. Doing
so will distort the picture.
When you use a converter box with your TV,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.
TV
From Cable
TV
From Cable
Stereo VCR