Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
41
32/36AFX61(E)
Setting the sleep timer
To set the sleep timer to turn the TV off automatically:
1. Press SLEEP (or MENU and yz) to display the CUSTOM
menu. TIMER will be highlighted.
2. After the number position starts to blink, press SLEEP repeatedly
to enter the length of time until the TV turns off automatically
(in 10-minute increments to a maximum of 180).
The SLEEP button can also be used to increment the time
interval of 10 minutes up to 180 minutes.
3. Press ENTER to start the timer.
CUSTOM
T I MER
CC C1
120
FAVORI CH1TE
FAVORI CH2TE
V
BACKGROUND
IDEO
CH
LABEL
LABEL
ING
To cancel the sleep timer:
Press POWER two times.
Setting the clock
To set the clock:
1. Press MENU, and then press x or • until the SET UP menu
appears.
2. Press y or z to highlight CLOCK SET.
3. After the number position starts to blink, press the Channel
Number buttons (0–9) to enter the correct time. The clock
operates on a 12-hour cycle.
4. Press ENTER to start the clock.
SET UP
LANGUAGE
CLOCK
ANT
ADD ADDERASE/
TV
CH
PROGRAM
CABLE/CABLE
1 ANT
09 25:
1/2
SET
ENGL SHI
TILT CORRECTION
I
+
7
To display the time on-screen:
Press RECALL.
Note :
To display the amount of time remaining until
the TV turns off automatically, press SLEEP
once. To clear the display, press EXIT.
SLEEP
POWER
yzx •
RECALL
MENU/
ENTER
Channel
Numbers
EXIT
Note:
If the power source for the TV is interrupted
(for example, the power cord is unplugged or
a power failure occurs), you will need to reset
the clock.