Filter
Top Products
6
Reference
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
Connecting a cable converter box
This connection allows you to watch cable and premium channels.
You should keep your TV selected to ANT-1 so that you can use the
TV features. When viewing premium channels, select ANT-2 and
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), then use the converter box to change channels.
You will need two coaxial cables.
CHANNEL IN
ON
IN OUT
OFF
OUT
RL
VAR
AUDIO
OUT
VIDEO
L/
MONO
AUDIO
R
IN
DVD IN
L
R
CR
CB
Y
L/
MONO
AUDIO
S-VIDEO
VIDEO
R
ANT
(
75
)
ANT-1
OUT
ANT-2
Cable converter box
AUDIO CENTER
VIDEO-1 VIDEO-2
COLOR
STREAM
INPUT
AUDIO
From Cable
TV
Connecting a cable converter box and a VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. You should keep your TV
selected to ANT-1 so that you can use the TV’s features. When
viewing premium channels or recording with the VCR, select ANT-2
and change the TV channel to 3 or 4 (whichever channel is vacant in
your area), then use the converter box to change channels.
You will need:
• three coaxial cables
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
CHANNEL IN
ON
OUT
IN
OFF
OUT
RL
VAR
AUDIO
OUT
VIDEO
L/
MONO
AUDIO
R
IN
DVD IN
L
R
CR
CB
Y
L/
MONO
AUDIO
S-VIDEO
VIDEO
R
ANT
(
75
)
ANT-1
OUT
ANT-2
Cable converter box
AUDIO CENTER
VIDEO-1 VIDEO-2
COLOR
STREAM
INPUT
AUDIO
IN fromt ANT OUT to TV
CH 3
CH 4
VIDEO
AUDIO
LR
IN
OUT
Stereo VCR
From Cable
TV
Note:
When you use a converter box with your TV,
there may be features that you can not
program using the remote control, such as
programming your favorite channels, labeling
channels, and blocking channels.
Caution:
If you want to record one channel while
watching another channel, a splitter (not
included) must be added between the cable
and ANT-1. One output of the splitter goes to
ANT-1 and the second output is connected to
IN on the cable converter box.
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable. Do
not connect the video cable and the S-video
cable to Video-1 simultaneously.
When you use a converter box with your TV,
there may be features that you can not
program using the remote control, such as
programming your favorite channels labeling
channels, and blocking channels.