Filter
Top Products
9
Reference
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one pair of audio cables
• one video cable
VIDEO
AUDIO
OUT
L
R
Camcorder
TV
Connecting an audio system
This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier, then
turn off the built-in speakers. (See“ Turning off the built-in speakers”
on page 40.)
You will need one pair of audio cables.
LINE IN
LR
CHANNEL IN
ON OFF
OUT
RL
VAR
AUDIO
OUT
VIDEO
L/
MONO
AUDIO
R
IN
DVD IN
L
R
CR
CB
Y
L/
MONO
AUDIO
S-VIDEO
VIDEO
R
ANT
(
75
)
ANT-1
OUT
ANT-2
AUDIO CENTER
VIDEO-1 VIDEO-2
COLOR
STREAM
INPUT
AUDIO
Amplifier
TV
From Cable, Cable Box
or Antenna
Caution:
If you are using a S-VHS camcorder with a
S-video output, connect this to the S-video
input on the TV and remove the video cable.
Do not connect the video cable and the
S-video cable to Video-3 simultaneously.