Filter
Top Products
15
Tuning the television for the first time
Before switching on the television put your decoder and media recorder to Standby if they are connected
and ensure the aerial is connected. To set up the television use the buttons on the remote control as detailed
on page 6.
8
Press
z
or
x
to view the DTV (digital channels)
or ATV (analogue channels) lists.
9
Use
e
or
f
to move through the list to select a
channel then press EXIT to view.
In ATV mode some areas may receive duplicate
stations. There may not be a clear picture or the
signal may be weak, so the station order can be
changed using ATV Manual Tuning.
NOTE: The time will be set automatically by
transmission but can be advanced or decreased
using Local Time Setting in the DTV Settings
screen.
When the search is complete the television will
automatically select position one.
The Auto Tuning screen will display the total
number of services found.
PLEASE NOTE
The Reset TV menu can also be accessed
at any time from the SETUP menu.
Auto Tuning
DTV Services Found: 90 ATV Services Found: 4
DTV ATV
Type Pos. Name CH
1 BBC ONE 34
2 BBC TWO 34
3 ITV1 31
4 Channel 4 31
5FIVE 48
6 ITV2 31
7 BBC THREE 34
Auto Tuning
DTV Services Found: 90 ATV Services Found: 4
DTV ATV
Pos. Name CH
0 VCR C60
1 BBC ONE C22
2 BBC TWO C28
3 ITV C25
4 CH4 C32
1
2
3
4
5
6
7
Press the
i
button, the Quick Setup screen will
appear. This screen will appear the first time that
the television is switched on and each time Reset
TV is selected.
Using
e
highlight Menu Language, then
z
or
x
to select.
Press
e
to highlight Country and
z
or
x
to
select. The television will now tune the stations for
your country. Press OK.
The Location screen will appear, press
z
or
x
to
select between Home or Store (for normal home
use select Home) then press OK.
If Home is selected the AutoView option will be
activated, automatically adjusting the picture
setting to the current viewing conditions. In most
cases the television will then operate with lower
energy consumption.
If the Ant/Cable In screen appears, press
z
or
x
to select between Antenna or Cable
then press OK.
The Auto Tuning start up screen will appear with
the option to select between DTV and ATV, DTV
or ATV. Using
z
or
x
select DTV and ATV then
press
e
to highlight Start Scan.
Press OK again to start Auto Tuning. The
television will start to search for all available DTV
and ATV stations. The progress bar will indicate
progress.
You must allow the television to complete
the search.
Quick Setup
Menu Language English
Country UK
Primary Subtitle Language English
Secondary Subtitle Language English
Primary Audio Language English
Secondary Audio Language English
Auto Tuning
Progress Found
DTV Tune 75% 80
ATV Tune Waiting...
Channel: C58