Toshiba XV*** Flat Panel Television User Manual


 
ATV Manual Tuning
Pos. Channel Station
0 C60
1 C22 BBC1
2 C28 BBC2
3 C25 ITV
4 C32 CH4
5 C69
6 C69
7 C69
8
4
Press
x
to select System and use
f
or
e
to
change if required.
Then press
x
to select Search.
Press
f
or
e
to begin the search. The search
symbol will flash.
20
ATV manual tuning
Press OK to select. If the position is skipped, Skip
must be removed before storing.
The television can be tuned-in manually using ATV Manual Tuning. For example: if the television cannot be
connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
Position: The number to be pressed on the remote control.
System: Specific to certain areas.
Colour System: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from
external source.
Skip: means nothing has been stored or the facility to skip the channel is ON. See page 21.
Signal Class: C for standard terrestial channels, S for cable channels
Channel: The channel number on which a station is being broadcast.
Search: Search up and down for a signal.
Manual Fine Tuning: Only used if interference/weak signal is experienced. See page 54.
Station: Station identification. Use the
f
or
e
and
z
or
x
buttons to enter up to seven characters.
Station
Position System Skip Signal
Class
Colour
System
Channel Search Manual
Fine Tuning
Use
f
or
e
to highlight the position required
e.g. we suggest Pos. 0 for a media recorder.
Select ATV using ATV/DTV. Press MENU and use
z
or
x
to select the SET UP menu, with
e
highlight ATV Manual Tuning, press OK to select.
To allocate a position on the television for a decoder and media recorder: turn the decoder on,
insert a pre-recorded film in the media recorder and press PLAY, then manually tune.
Use
z
and
x
to move across the screen and select any of these ATV Manual Tuning options, then
f
and
e
to adjust the settings.
1
2
3
Each signal will show on the television, if it is not
your media recorder, press
f
or
e
again to
restart the search.
When your media recorder signal is found, press
x
to move along to Station. With
f
,
e
,
z
and
x
put in the required characters, e.g. VCR.
7
5
6
Different
Channel
numbers
may be
displayed
SETUP
Menu Language English
Country UK
Ant/Cable In Antenna
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
AV Connection
ATV Manual Tuning
System
0
I A C 60 0
ATV Manual Tuning
Searching: Up
0 I A C 60 0