Filter
Top Products
57
Questions and Answers (continued)
A
Use the Master PIN code of 1276, then change to a
number of your choice. Ensure that no-one else can
use the Master PIN by removing the Owner’s Manual.
What can be done if the PIN number has
been forgotten?
Q
A
Most AV equipment with CEC link should function
correctly, however only Toshiba products are assured
to work.
Will other manufacturers AV equipment
work with REGZA-LINK (SKY, Home
Cinema etc)?
Q
A
The serial number is located centrally at the rear of
the television. It is also printed on the carton box
supplied.
Where is the Serial number/model name
located?
Q
A
This is the optical Digital Audio output. Avoid contact
with the eyes for any extended period of time.
Why is there a red light on the back of the
television and is it dangerous?
Q
A
As with any device using lamps or similar, the
television will output a certain amount of heat.
Why does the television get hot?
Q
A
These can be plugged into the connections on the
side of television.
How can a camera/camcorder be
connected?
Q
Why are the LEDs on the front of the
television flashing?
Q
LED indication
Condition Solution
LED-3 LED-2 LED-1
Orange
(Solid)
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
Programme Timer
is set
–
Red
(Solid)
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
Programme Timer
is working
–
OFF
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
Programme Timer
is NOT set
–
Orange
(Solid)
OFF
Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer
is set
–
Red
(Solid)
OFF
Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer
is working
–
OFF OFF
Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer
is NOT set
–
Orange
(Solid)
Green
(Solid)
Red
(Solid)
Power OFF(Standby)
On Timer is set
Programme Timer
is set
–
Red
(Solid)
Green
(Solid)
Red
(Solid)
Power ON (Standby)
On Timer is set
Programme Timer
is working
–
OFF
Green
(Solid)
Red
(Solid)
Power OFF
(Standby)
On Timer is set
Programme Timer is
NOT set
–
Orange
(Solid)
OFF
Red
(Solid)
Power OFF(Standby)
On Timer is NOT set
Programme Timer is
set
–
Red
(Solid)
OFF
Red
(Solid)
Power ON (Standby)
On Timer is NOT set
Programme Timer
is working
–
OFF OFF
Red
(Solid)
Power OFF
(Standby)
On Timer is NOT set
Programme Timer is
NOT set
–
OFF OFF
Red
Blinks
Power protect
detection
Turn OFF the TV
and unplug the
power cord. Plug
the power cord in
again and turn
ON the TV
A
Check the table below.
A
If settings on connected REGZA-LINK equipment are
changed the equipment may fail to work correctly
with television. Removing the HDMI cable then replacing
it may help. If not turn off the television, remove the
power cable from the wall socket, then plug the television
back in and switch on.
Why doesn’t REGZA-LINK work?
Q