Filter
Top Products
47
Inputs
TV
B
1
B
2
B
3C
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
1 DVD
2 VCR/DVD
3 CBL/SAT
4 GAME/TV
5AUX
REGZA-LINK
REGZA-LINK controls
This feature uses CEC (Consumer Electronics Control) technology and allows the control of Toshiba
REGZA-LINK compatible equipment from the television remote control. Note: not all Toshiba products
currently support REGZA-LINK.
REGZA-LINK mode on the televisions remote control allows
the control of connected REGZA-LINK equipment being
watched.
To control the REGZA-LINK input source first select the
equipment with REGZA-LINK input source selection, then
switch the mode on the remote control to REGZA-LINK and
press any buttons.
The available functions depend on the equipment
connected. Not all the remote control keys may be
available. Please refer to the operation manual for each
piece of equipment connected.
The television features that can be controlled by the
connected equipment are: Standby, Volume, Channel,
Sound mute, Display information, Number buttons and
Previous programme.
REGZA-LINK Equipment Control
Press
x
and a second selection screen will
appear showing all connected REGZA-LINK
equipment.
3
Use
f
or
e
to highlight an input source, then
press OK to select.
NOTE: When the television is switched on it will
take a few minutes for the REGZA-LINK logo to
appear in the list, when an HDMI cable is
removed it will take a few minutes for the logo to
disappear.
NOTE: If the HDMI cable from connected
equipment is changed or HDMI equipment
settings are changed Enable REGZA-LINK in
the REGZA-LINK setup menu may need to be
reset to On.
When the REGZA-LINK input source is selected
some REGZA-LINK equipment may automatically
switch on.
The following features are dependent on the
connected equipment. For operating information
refer to the operation manual for all connected
equipment.
REGZA-LINK Input Source Selection
When any equipment using CEC technology is connected
the REGZA-LINK icon will show in the input source list
allowing selection of individual devices.
Press
B
and a list will appear on screen
showing modes and all stored external
equipment.
Press
e
to highlight the input source showing
the REGZA-LINK logo.
1
2
4
To control television
functions
To control functions of
connected REGZA-LINK
equipment
To control functions of a
connected DVD
* HDMI4 is model dependant