Filter
Top Products
Page 19
More Favorite Channels
You can also use the "A, B, C and D" buttons to
program favorite channels. Each button can
program up to 5 favorite channels (or a total of
20 button presses), but you're not limited to using
these buttons for only that. You can record any
series of button presses into a macro. This is great
switching video or audio sources. Here is an
example of how to program a macro on the "A"
button with three favorite channels. We'll use "25,
50, and 75."
STEP 1: Press the device you are getting channel
control from. Ex. Cable.
STEP 2: Press and hold the "A" button and
"Mute" button at the same time until a
device button lights up.
STEP 3: Press "2".
STEP 4: Press "5".
STEP 5: Press "Select".
STEP 6: Press "Stop".
STEP 7: Press "5".
STEP 8: Press "0".
STEP 9: Press "Select".
STEP 10: Press "Stop".
STEP 11: Press "7".
STEP 12: Press "5".
STEP 13: Press "Select".
STEP 14: Press "Stop".
STEP 15: Press "Channel Up" to save macro.
Note: Pressing the "Select" button just assures the
quickest response from the Cable box. Pressing
"Stop" allows you to program several favorite
channels on one button. Now, the first press of the
"A" button will change the channel to "25." The
second, to "50" and the third, to "75." Then the
sequence starts all over again.