Filter
Top Products
STEP 2: Press the VOLUME UP button and then
press either the TV or AUDIO component button that
you want to use for volume. The Component LED
light will blink three times to confirm that it is saved.
This sets up three buttons (Volume Up, Volume Down
and MUTE) as a group for that component.
Repeat Steps 1-2 for all other components.
Note: SimpleSound is what’s technically referred
to as a “Punch Through” feature and is not limited
to volume control. It can also be applied to other
groups of buttons. If you find yourself switching to a
particular component mode frequently to access a
particular control, consider using Punch Through.
Page 22
VOLUME
UP
AV-EXpertManual.qxd 7/12/07 6:41 PM Page 22