Filter
Top Products
Page 28
Erasing MacroPower & Other
Macro Commands
STEP 1: To erase MacroPower commands on the
POWER ON or SYSTEM OFF button, press and
hold either the POWER ON or SYSTEM OFF button
and the MUTE button simultaneously for two seconds
until the current status component LED turns on.
IMPORTANT: If you don’t proceed to the next
step within 30 seconds, the LED will turn off and exit
set-up mode and you will need to start over.)
STEP 2: Press the CHANNEL UP button to erase
and exit Erase mode. The component LED light will
blink three times to confirm the erasure.
SYSTEM
OFF
POWER
ON
MUTE
NOTE: To erase other Macros, simply press the
appropriate button in Step 1 in combination with
the MUTE button.
CHANNEL
UP
AV-EXpertManual.qxd 7/12/07 6:41 PM Page 28