Filter
Top Products
Adding Storage to 1950/2950 Servers
VOD-W Admin Guide 75
As another example, the following window is shown for ES10 3 TB devices.
23. In the Initialize and Convert Disk Wizard screen, leave all disks unchecked and click
Next.
As an example, the following window is shown for ES5 1.5 TB devices.
Note The windows you see from this point on will vary depending on the capacity of the
devices you are actually configuring. As shown in Table 8 on page 82, you may be
configuring arrays with 1.5–13.5 TB of storage. The windows for arrays other than 1.5
and 3 TB are similar to the screens shown here but are not identical.
Note Two or more disk arrays may appear if you have 10 or more physical disks since each
group of 5 disks were configured as a single RAID5 array in step 22.