Filter
Top Products
Adding Storage to 1950/2950 Servers
VOD-W Admin Guide 81
34. Select G drive and create Content2 by right-clicking and selecting New > Folder. Then
create Content3 on the H: drive and Content4 on the I: drive if necessary. If there is more
than one disk enclosure, repeat for drives J through O as necessary.
35. Go to
Control Panel > InfoValue QuickVideo.
36. Click on
Add Storage Path.
37. Click on
Browse and select G:\Content2. Then click Add. Repeat for Content3 and
Content4 on drives H and I if necessary. If second or third enclosure is present, repeat
for drives I through O as necessary. Your results should appear as follows. Then click OK.
38. Then click
OK to close InfoValue QuickVideo.