Filter
Top Products
Installation
Vidikron Vision Model 120 Installation/Operation Manual 29
PRE
L
IMINAR
Y
Installing the Fixed CineWide
Base Plate (Vision
120/CineWide)
To install the fixed CineWide base plate on a Vision 120/CineWide:
1. Place the projector upside down on a blanket or other soft surface.
2. Line up the mounting holes on the lens mount base plate with those on the bottom of
the projector, directly below the primary lens (see
Figure 3-9).
3. Secure the base plate to the projector with the screws provided for this purpose.
Figure 3-9. Installing the Fixed CineWide Base Plate
CineWide
Base Plate
Screw, Phillips
Pan-Head,
M6-1.0 x 12mm (4x)