Filter
Top Products
35
Vidikron Vision Model 30 Owner’s Operating Manual
The Vision Model 30 has six memory settings for Color Temperature. Four of these settings
are factory set to default as follows:
0 -- Original lamp color temperature
1 -- 5400 kelvins
2 -- 6500 kelvins
3 -- 8500 kelvins
4 -- Custom
5 -- Custom
Custom 4 and 5 memory are installer-adjustable and can be used to create custom settings.
There are nine adjustable “white balance” parameters available for the Custom 4 and 5
settings (three each for red, green and blue). These are described later in this section;
refer to “Service.”
NOTE: You must enter a passcode in order to enter the Service menu.
Choose Color Select from the Picture Adjust menu to select the color space that is
appropriate for the source signal, to achieve optimal color balance.
If you select NTSC, HDTV or PAL, you can make further adjustments to individual color
characteristics in the ICC Adjust sub-menu under the Service menu, described later in
this section. (The Standard color select is factory-set and not adjustable.)
On-Screen Display Menus
Color Select
Color Temperature