Filter
Top Products
Vidikron Vision 50 Series Owner’s Operating Manual 5
PRE
L
IMINAR
Y
2.1
Vision 50 at a Glance
Figure 2-1 and Figure 2-2 show the key Vision 50 components.
Figure 2-1. Vision 50 Front/Side/Top View
1. VIDIKRON LOGO
The logo can be rotated to match the projector
orientation: inverted (ceiling-mounted) or upright.
To rotate the logo, grip it at the sides, pull it away
from the projector and rotate it 180 degrees.
2. TOP IR SENSOR
3. LAMP LED
Indicates lamp status as follows:
• Off during normal operation
• Red when the lamp has exceeded its usage life or developed a problem.
• Flashes red when the fans are not working or the lamp cover is open
4. POWER/STANDBY LED
Indicates power status as follows:
• Orange when the projector is in standby mode
• Flashes orange for 45 seconds after the projector is turned on to indicate that the lamp
is warming up
2. Controls and Functions
12
6789
4 5
3