Filter
Top Products
Installation
22 Vidikron Vision 50 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
Install Lens Motor: Position the AutoScope Lens Motor (item #1) as shown in Figure 3-7.
Line up the mounting holes on the lens motor housing with those on the underside of the
projector. Secure the motor to the projector with the four remaining 10-32 x 1/2” Pan-Head
Phillips screws (item
#2) and nylon spacers (item #5).
Figure 3-7. AutoScope Lens Motor Installation
After you have installed the AutoScope lens motor, proceed with Mounting the Vision 50 on
page 24.