Filter
Top Products
Installation
20 Vidikron Vision 50 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
Installing the AutoScope Lens
Motor (Vision 50/CineWide
with AutoScope)
Figure 3-5 shows the Vision 50/CineWide with AutoScope motor assembly.
Figure 3-5. Vision 50/CineWide with AutoScope Motor Assembly – Exploded View
Remove Projector Front Height Adjusters:
Place the projector upside down on a blanket
or other soft surface. Then, remove the two
height adjusters at the front of the projector
by turning them counterclockwise until they
come out.
➤
3
4
Screw, Phillips
Pan-Head,
10-32 x 1/2”
(10x)
1
AutoScope
Lens Motor
2
CineWide with
AutoScope
Ceiling Mount
Adapter/
Projector Stand,
Right
CineWide with
AutoScope
Ceiling Mount
Adapter/
Projector Stand,
Left
5
Nylon Spacer,
5/8” diameter x
3/16” high (10x)