Filter
Top Products
Vidikron Vision Model 65/Model 75 Installation/Operation Manual 1
1.1
About This Manual
This Owner’s Manual describes how to install, set up and operate a Vidikron Vision 65 or
Vision 75 DLP™ Home Theater Projector.
Throughout this manual, the Vidikron Vision Model 65 and Model 75 DLP Home Theater
Projectors are referred to collectively as the “Vision 65/75.” Except where noted, the features
and functions described in this manual are common to all versions of this product.
Target AudienceVidikron has prepared this manual to help home theater installers and end users get the
most out of the Vision 65/75.
Vidikron has made every effort to ensure that this manual is accurate as of the date it was
printed. However, because of ongoing product improvements and customer feedback, it
may require updating from time to time. You can always find the latest version of this and
other Vidikron product manuals on-line, at www.Vidikron.com.
If You Have Comments About
This Manual...
Vidikron welcomes your comments about this manual. Send them to info@Vidikron.com.
Textual and Graphic
Conventions
Text Conventions: The following conventions are used in this manual, in order to clarify the
information and instructions provided:
• Remote and built-in keypad button identifiers are set in upper-case bold type; for
example, “Press EXIT to return to the previous menu.”
• Computer input (commands you type) and output (responses that appear on-screen) is
shown in monospace (fixed-width) type; for example: “To select the Component
1 input ,
type X133X.”
• All keys with functional names are initial-capped, set in bold type and enclosed in angle
brackets. These keys are the following: <Enter>, <Spacebar>, <Control>,
<Esc> and <Tab>.
• <Enter> indicates that you may press either the RETURN or ENTER key on your keyboard
if it has both keys.
In addition to these conventions, underlining, boldface and/or italics are occasionally used to
highlight important information, as in this example:
1Introduction
A carriage return must be used after each command or string.
Note