Filter
Top Products
Installation
22 Vidikron Vision Model 65/Model 75 Installation/Operation Manual
Install Lens Motor:
1. Position the AutoScope Lens Motor (item #2) as shown in Figure 3-7.
2. Line up the mounting holes on the lens motor housing with those on the underside of
the projector.
3. Secure the motor to the projector with the four (4), supplied 10-32 x 1/2” Pan-Head
Phillips screws (item
#1) and nylon spacers (item #7).
4. Secure the AutoScope Ceiling Mount Adapters/Projector Stands to the motor using the
two (2), supplied 10-32 x 1/4” Flat-Head Phillips screws (item #3).
Figure 3-7. AutoScope Lens Motor Installation
After you have installed the AutoScope lens motor, proceed with Mounting the Vision 65/75
on page 25.