Filter
Top Products
Installation
14 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
3.2
Quick Setup
Table 3-1 gives a quick overview of the Vision 90t/100t installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step Procedure
For Details,
Refer to page...
1 Choose a location for the projector 15
2 Install CineWide (secondary anamorphic) lens (optional) 20
3 Connect signal sources to the projector 21
4 Connect external controller to RS-232 port (optional) 25
5 Connect other home theater components to 12-volt trigger
outputs (optional)
25
6 Apply power to the projector 26, 27
7 For rear-screen and/or ceiling-mount installations, select the
proper picture orientation
27
8 Lens adjustments: projected image size (zoom), position
(shift) and focus
18, 28
9 Projector calibration: adjust the following for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
30 through 37
Note