Filter
Top Products
Maintenance and Troubleshooting
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 47
Note that the lens mount flange has a female
socket connector for the lens motor on the
right side of the flange.
Note that the lens assembly motor has a
male socket connector.
6. Hold the replacement lens assembly with
the motor facing right (or left, if the projector
is inverted). Carefully insert the back of the
lens assembly into the hole in the lens
flange.
7. Gently push the lens assembly in until it is
seated flush against the flange and the
connectors have seated.
8. Secure the lens assembly to the projector flange with the three Allen screws that you
loosened in Step
4.
9. Replace the front lens bezel and tighten the
Phillips screws at the top and bottom of the
bezel to secure it.