Vidikron VP-4200 Flat Panel Television User Manual


 
Installation
Vidikron PlasmaView Owner’s Operating Manual 15
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the PlasmaView installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1
Mount the PlasmaView on a wall or table stand 16
2
Connect signal sources to the PlasmaView 19
3
Connect external controller to RS-232 port (optional) 25
4
Apply power to the PlasmaView 27
5
Change the OSD language, if desired 27
6
If using the PlasmaView with a computer, adjust computer
display properties
28
7
Display calibration: adjust the following for each input; save
settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
34 through 40
Note