Filter
Top Products
3
Installing the Stand (For 42”)
Screw type1 x 5pcs
Screw type2 x 5pcs
TYPE1
TYPE2
Place the display face down on a protective surface. Afterwards attach the neck
piece onto the display and screw in the 5 screws to secure the neck. then insert
the neck onto the bottom stand and secure the parts by inserting the screws and
tightening them with the screwdriver provied.
Note: Attaching the stand requires two people.
Installing the Stand (For 32”)
Screw x 5 pcs
Place the display face down on a protective surface. Then insert the neck onto the
bottom stand and secure the parts by inserting the screws and tightening them with
the screwdriver provied.
Note: Attaching the stand requires two people.
Disconnecting the Stand (For 42”/32”)
To remove the stand, remove the screws in the circled area and the neck will come
off.