Filter
Top Products
16
Blocking Selected Input Source
To block the selected input source:
1. Press MENU to display the OSD main menu.
2. Press
or to select PARENTAL menu, then
press ENTER to enter the menu.
3. Enter the password.
4. Press
or to select Source Lock, then press
ENTER to enter its submenu.
5. Press
or to select the input source that you
want to block.
6. Press ENTER to conrm.
A
icon indicates the selected input source has
been blocked.
7. Press EXIT to exit the menu.
SOURCE LOCKSOURCE LOCK
AV
YPbPr
DVI
HDMI
PC
USB
:Return :Move
MENUMENU
:On/Off
ENTERENTER
:Page
Page 1/1
PARENTAL CONTROLPARENTAL CONTROL
Lock Parental Control
Change Password
Keypad Lock
Source Lock
System Lock
:Return :Move
MENUMENU
:Go to Next Menu
ENTERENTER
Resetting to Factory Default Settings
To reset all setting to the factory default settings:
1. Press MENU to display the OSD main menu.
2. Press
or to select OTHERS menu, then press
ENTER to enter the menu.
3. Press or to select All Reset, then press
ENTER to reset to the default settings.
OTHERSOTHERS
Blue Back
No Signal Power Off
No Operation Power Off
Usage Monitor
Audio Only Off
Display ID 1
All Reset
:Return :Move
MENUMENU
Execute
:Change Setting
Display ID Setting
To set ID number to display for RS232 function:
1. Press MENU to display the OSD main menu.
2. Press
or to select OTHERS menu, then press
ENTER to enter the menu.
3. Press or to select Display ID.
4. Press or to set the ID number (1~98).
For details information, refer to the RS232 Protocol
on page 26~33.
5. Press EXIT to exit the menu.
OTHERSOTHERS
Blue Back
No Signal Power Off
No Operation Power Off
Usage Monitor
Audio Only Off
Display ID 1
All Reset
:Return :Move
MENUMENU
Execute
:Change Setting