Filter
Top Products
17
Customizing PC Display
Connect the PC and your display using the VGA cable. See “Personal Computer” on
page 10.
1. Press SOURCE to display the Source Select
menu.
2. Press
or to select PC, then press ENTER to
conrm the setting.
3. Press MENU to display the OSD main menu.
4. Press or to select PICTURE menu, then press
ENTER to enter the menu.
5. Press or to select PC Settings, then press
ENTER to enter its submenu.
6. Press
or to select Auto Adjust, Horizontal
Position, Vertical Position, Clock, or Phase, and
press or to adjust the setting.
7. Press EXIT to exit the menu.
PICTUREPICTURE
Picture Settings
Screen Size Wide
PC Settings
Color Temperature Normal
Backlight High
Advanced Picture Settings
:Return :Move :Go to Next Menu
MENUMENU ENTERENTER
PC SETTINGSPC SETTINGS
Auto Adjust Execute
Horizontal Position
Vertical Position
Clock
Phase
Reset Execute
:Return :Move :Press to Execute
MENUMENU ENTERENTER
Using USB Function
Your display is equipped with a USB connector that enables you to view photos or
listen to music stored on a USB storage device.
Note:
USB only supports JPEG and MP3 files.
Multimedia support format
Multimedia
Categories
File
Extension
Decoder Notes
Music *.mp3
MPEG1 Audio LAYERIII
(Not corresponding MP3 Pro)
Sampling Frequency [KHz] : 32 / 44.1 / 48
Bit Rate [kbit/s]: 32 / 40 / 48 / 56 / 64 / 80 /
96 / 112 / 128 / 160 / 192 / 224 / 256 / 320
/ VBR
Photo *.jpg Baseline
Horizontal Max: less than 5000
Vertical Max: less than 5000
Horizontal Min: greater than 8
Vertical Min: greater than 8
1. Plug a USB device to the USB connector on the rear side of the display.
2. Press SOURCE to display the Source Select menu.
3. Press or to select USB, then press ENTER to confirm the setting. The USB
menu appears on the screen.
MusicMusic PhotoPhoto Media SettingMedia Setting
NowPlaying
NowPlaying
4. Press or to select the menu item, then press ENTER.
5. Press EXIT to return to the previous screen.