Filter
Top Products
VIZIO GV42L HDTV User Manual
Version 8/1/2006 10
www.VIZIOCE.com
Chapter 1 Basic Controls and Connections
1.1 Front Panel
Power ‘VIZIO’ light – The VIZIO name lights white
when powered on and orange when powered off.
Remote Control Sensor – This is the window through
which all of the remote control signals pass to the
sensor. Point the remote control directly at this
window for the best response to the remote signal.
1.2 Side Panel Controls
Power (
) – Switch the GV42LHDTV on by pressing the button once.
Press the button again to the GV42LHDTV off.
Menu – This button activates the On Screen Display (OSD). If a sub-
menu is active, pressing this button will return to the previous menu level.
Channel +/- – Use these buttons to step up or down the TV channels.
While the OSD is active, these buttons function as up and down controls
in the OSD menus.
Volume +/- – Use these buttons to increase or decrease to the speaker
volume. While the OSD is active, these buttons function as left and right
controls in the OSD menus.
Input (Enter) – Repeated pressing of this buttons steps through the
input sources in the following sequence: TV, AV1, AV2, Component 1,
Component 2, RGB, HDMI 1 and HDMI 2. Once you have stepped
through the entire sequence, you will return to the beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.