Filter
Top Products
VIZIO JV50P HDTV10A User Manual
Version 5/21/2007 25
www.VIZIO.com
2.7 Connecting a PC Computer
1. Turn off the power to the HDTV
and PC Computer.
2. Connect a 15-pin D-Sub RGB
(VGA) cable to the RGB output of
your pc computer and the other
end to the RGB PC input (blue
area) at the rear of the HDTV.
3. Connect the Audio Out on your pc
computer to the RGB PC Audio
input (blue area) at the rear of the
HDTV.
4. Turn on the HDTV and PC
Computer.
5. Select RGB using the INPUT button on
the remote or side of the HDTV, or
directly by pressing the RGB button on
the Remote Control.
2.7.1 Preset PC Resolutions
If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1366x768 at 60Hz
for best picture quality (refer to the graphic card’s user guide for questions on how to set this timing
mode). Please see the table below for the factory preset resolutions.
Resolution Refresh (Hz) H.Freq (kHz) V.Freq (Hz) H.Sync V.Sync Pixel Freq (MHz)
640x480 60 31.5 59.94 N N 25.175
640x480 75 37.5 75.00 N N 31.500
720x400 70 31.46 70.08 N P 28.320
800x600 60 37.9 60.317 P P 40.000
800x600 75 46.9 75 P P 49.500
800x600 85 53.7 85.06 P P 56.250
1024x768 60 48.4 60.01 N N 65.000
1024x768 75 60.0 75.03 P P 78.750
*1366x768 60 47.7 60.00 P N 85.500
NOTES: N = Negative, P = Positive, * = Primary (Native) Mode
Note:
a) For the best picture
quality when connecting
a pc computer through
RGB PC, set your pc
computer timing mode to
VESA 1366x768 at
60Hz. Please refer to
the pc or graphic card’s
user guide for additional
information on how to set
the timing mode and the
video output
requirements of the
product.
b) A RGB (VGA) cable and
stereo mini jack cable
are not included and can
be purchased at an
electronics store.