Filter
Top Products
VIZIO JV50P HDTV10A User Manual
Version 5/21/2007 45
www.VIZIO.com
4.5.7 Image Cleaner
Plasma technology has an effect called Image
Sticking. If stationary pictures remain displayed
for too long their ghost image will remain when the
picture is taken away; the image is sticking to the
screen. Usually ghost images such as these
disappear after a few minutes during normal use
but if the stationary image was left on the screen
for too long then the ghost image may be more
persistent. To remove this image the JV50P has
an Image Cleaner function and you may choose
this to remove the ghost image. You may let the
Image Cleaner cycle through its pre-programmed
time of you may stop the function by powering the
HDTV off.
CAUTION: If you leave a stationary image on the screen for a few hours (a computer desktop image for
example) it may be permanently burnt onto the screen and the Image Cleaner will not be able to remove
it. Station logos and ticker tape images my leave a ghost image but this is usually not permanent. Image
Sticking is not covered under the warranty.
4.5.8 Reset All Settings
Press the button to highlight the Reset All Settings selection.
Press the button to reset the TV to the default factory settings.
Note: This does NOT reset the Parental Control Password.
4.6 DTV / TV Input Parental Control
4.6.1 Channel Block
If you want to restrict certain channel and program viewing, you can do this by turning on the Parental
Control. Selected programs, movies and channels can then be made available only after an authorized
password has been entered and accepted by the TV.
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE adjustment
page. Press the button to display the PARENTAL
page.
The Password must be entered before the TV will
continue with Parental settings. The default password
set in the factory is 0 0 0 0. If you are going to use
the Parental Control feature you should change the
password.
Press the button to highlight the Channel Block
selection.
Press the button to turn it on or off.
Note: Make sure you write down and store the new password in a secure place.
The Reset All Settings feature (see page 37) does NOT reset the password.