Filter
Top Products
VIZIO JV50P HDTV10A User Manual
Version 5/21/2007 42
www.VIZIO.com
4.4 DTV / TV Tuner Setup
When you first used your JV50P you will have setup your TV for DTV / TV channels using the Initial Setup
screens. If you did not do this or if your setup has changed, you can do this from the TV TUNER SETUP
menu.
4.4.1 Tuner Mode
When the MENU button is pressed, the On Screen
Display (OSD) appears on the PICTURE
adjustment page. Press the button to display
the TV page.
Press the button to highlight the Tuner Mode
selection.
Press the button to choose Cable or Air
(Antenna) depending upon which equipment you
have attached to the DTV / TV Input.
4.4.2 Auto Search
Press the button to highlight the Auto Search
selection.
Press the button to Auto Search for TV
channels available. The TV will automatically
search for analog and digital channels.
4.4.3 Skip Channel
After the TV has stored all of the available DTV
channels in memory you will find that some
channels will be too weak to watch comfortably or
they may be channels you do not want to see.
Select the channel you wish to remove, press the
MENU and buttons to open the TV TUNER
SETUP menu and then press the button to
highlight SKIP CHANNEL. Press the button to select this channel to be skipped when using the CH+
or CH- button. You will still be able to select this channel using the number buttons on the remote control.
4.4.4 Time Zone
Setting the correct Time Zone for your area will
ensure that the correct program times are shown
after pressing the GUIDE button on the remote
control.
Press the button to highlight the Auto Search
selection.
Press the button to select your area.
4.4.5 Daylight Saving
As for Time Zone, setting the daylight saving time
for your area will ensure that the correct program
times are shown after pressing the GUIDE button on the remote control. Press the button to highlight
the Daylight Saving selection. Press the button to select On or Off.