Filter
Top Products
VIZIO JV50P HDTV10A User Manual
Version 5/21/2007 5
www.VIZIO.com
Installation Preparation
Please read this user manual carefully before installing your VIZIO HDTV.
The power consumption of the TV is about 450W, please use the power cord designated for TV. When
an extension cord is required, use one with the correct power rating. The cord must be grounded and the
grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space
between the back of the TV and the wall. If you would like to mount your TV on the wall, please see
below ‘Preparing Your Plasma HDTV for Wall Mounting’ for additional information. Avoid installing the TV
in places with high humidity, dust or smoke so as not to shorten the service life of the electronic
components.
Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Please contact VIZIO for more information on these
services at 888-VIZIO-23 (888-849-4623) or www.VIZIO.com
.
Preparing Your Plasma HDTV for Wall Mounting
The VIZIO JV50P can either be kept on the stand base or mounted on the wall for viewing. If you choose
to mount the JV50P on the wall, please follow the instructions below for removing the stand base.
To remove the stand base
1. Unplug all of the cables and cords from your JV50P
HDTV10A.
2. Place the JV50P HDTV10A face down on a soft and
flat surface (blanket, foam, cloth, etc) to prevent any
damage to the TV.
3. Remove the four (6) screws on each side of the back
panel of the JV50P HDTV10A located near the bottom
so that the stand base can be removed (see Figure A).
4. Gently pull the stand away from the JV50P HDTV10A
by grasping firmly on the base.
5. Now, the JV50P HDTV10A can fir securely to a mount
(sold separately) by utilizing the mounting holes in the
center of the back panel of the TV (see Figure B).
Please make sure to read the instructions of your
specific mount to properly hang the JV50P HDTV10A.
To find the perfect mount for the VIZIO JV50P HDTV10A, browse VIZIO’s certified mount selection at
www.vizio.com
or call directly 888-VIZIO-23 (888-849-4623).