Filter
Top Products
VIZIO RP56 User Guide
040330 22
Connecting Coaxial (RF)
Using your VCR
1. Turn off the power to the DLP TV and VCR.
2. Connect the “Output to TV” (RF Out or Antenna Out) connector on the rear of your VCR to the
TV/CABLE IN connector on the rear of your DLP TV.
3. Turn on the power to the DLP TV and VCR.
4. Select TV using the INPUT button on the front of the DLP TV.
5. Select Channel 3 or 4 to match the channel selected on the rear of your VCR.
Note: a). If you have an off-air antenna or cable TV, connect the off-air antenna or TV cable to the
TV/CABLE IN connector on the rear of your VCR.
b). Make sure the antenna or cable TV is correctly grounded.