Filter
Top Products
VIZIO RP56 User Guide
040330 46
Replacing the Lamp
Users should replace the lamp in the projector approximately every 6,000 hours to maintain the best
possible display image. Do not use a lamp past the rated lamp life.
The high-pressure lamp may explode
if handled incorrectly. Make sure
that the DLP TV is turned off, power
is disconnected, and the lamp is
completely cooled (minimum of 45
minutes) before replacing it.
1. Turn off your DLP TV
2. Disconnect the power cord and all other external cables.
3. Allow the lamp to cool completely; at least 45 minutes.
4. Remove the two lamp access panel screws and then remove the access panel.
5. Remove the two lamp module retaining screws.