Filter
Top Products
VIZIO VL260M User Manual
Version 5/29/2009 35
www.VIZIO.com
Note: Only settings under the Audio menu will be reset.
TV Menu
When you first turned on your HDTV you set up your TV for DTV / TV channels using the Initial Setup
screens. If you did not do this or if your setup has changed, you can do this from the TV
menu.
1. Press the MENU button on the remote control and the Picture menu will be shown on the screen.
2. Press
! or " on the remote control to highlight the TV menu, and then press MENU to select it.
3. Press
! or " on the remote control to select a TV menu option.
4. Once the menu option is highlighted, press $ or # on the remote control to adjust the setting.
5. Once the adjustments are completed press the LAST button repeatedly to exit the OSD
completely.
Tuner Mode
Select Cable or Antenna depending upon which
equipment you have attached to the DTV / TV Input.
Auto Search
Automatically search for TV channels that are
available in your area. The TV will search for analog
and digital channels.
Partial Channel Search
If you believe channels are missed from the auto
search, you can do a partial channel search to look
for channel in a certain channel range again. Select
to scan for Analog, Digital, or both Analog/Digital
channels, then press the
" button to highlight the
“From” and “To” selection. Press the # button to
select the range of channel numbers you want to
start searching in. Press MENU to start channel search.