Vizio VL260M Flat Panel Television User Manual


 
VIZIO VL260M User Manual
40
www.VIZIO.com
Canadian French Rating
Note: When Rating Enable is OFF, Canadian French Rating adjustments are not available.
Press the MENU button to block (locked) or allow (unlocked) channels by the following Canadian
French ratings:
G – General audience
8 ans+ – General – not recommended for young children
13 ans+ – Not suitable for children under 13 years of age
16 ans+ – Not suitable for under 16 years of age
18 ans+ – Adults only
DTV Rating
This option updates the TV or Movie rating table for digital programs in your local or regional area.
It will allow the parental guidance control feature in your TV to have the most current parental
control database for a digital signal. If Not Available appears at the bottom of the menu, then no
update is available (the option is not activated in your area). This option may be available in the
future for activation.
Block Unrated TV
Block programming that does not have a rating.
Change the Password
Select Access Code Edit to enter a new, 4-digit password using the
number buttons on the remote control. Enter it a second time to
confirm you entered it correctly.
Note: Make sure you write down and store the new password in a
secure place. The System Reset feature (below) does NOT reset the
password.
System Info
Display the technical information including model name, version and revision of firmware, source type,
and resolution.
System Reset
To select the options in the System Reset sub-menu, press the MENU button or the # button. A new
menu will be displayed showing the following System Reset settings:
Setup Wizard
Use this function to return to the Initial Setup menu. Use this function if you want to have a guided
setup when you move your TV. Please refer to Chapter 3 for more information.
Note: Previously scanned channels will be removed.
Reset All Settings
Use this function to reset the TV to the default factory settings.
The screen will display a message to confirm that you want to reset the values to factory settings.
Note: This does NOT reset the Parental Control Password.