Filter
Top Products
VIZIO VP422 HDTV10A User Manual
Version 5/29/2008 12
www.VIZIO.com
1.5
1.51.5
1.5 VIZIO Re
VIZIO ReVIZIO Re
VIZIO Remote Control
mote Controlmote Control
mote Control
GUIDE – This button displays program information. Press this button once and the information of the
program being viewed is shown. Press it a second time and the Electronic Programming Guide will
appear in the screen.
POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the
Standby mode.
TV – Press this button to select TV.
AV – Press this button to select the Audio Video input. Pressing this button
repeatedly will get you to the AV input. Keep in mind that if S-Video cable is
being used, then AV will show the signal going through this input as the S-
video takes priority.
COMP – Press this button to select the Component (YPbPr) input. Pressing
this button repeatedly will take you through the Component input.
HDMI – Press this button to select the HDMI input. Pressing this button
repeatedly will get you through the HDMI (HDMI1, HDMI2 and HDMI3)
different inputs.
MENU – Use this button for the On-Screen Display (OSD) menus. When use
within the OSD menus, pressing this key will make the selection of an option.
- These buttons navigate the On-Screen Display (OSD).
MUTE – This button turns the sound on and off.
LAST – This button recalls the previously viewed channel when it is used in
TV mode; meaning that the TV unit has control over the signal or program
being watched. This button also has different functions when being used in
conjunction with the On-Screen Display (OSD) menu.
VOL (+ or -) – These buttons turn the volume up or down.
CH (+ or -) – These buttons change the channels up or down.
NUMBER BUTTON PAD – Use these
buttons to select a channel or enter a
password.
INPUT – This button allows the user to cycle
through the inputs. Repeatedly pressing of
this button will step you through the input
sources in the following sequence: TV, AV
(S-Video), Component, RGB, HDMI1,
HDMI2 and HDMI3. Once you have stepped
through the entire sequence, you will return
to the beginning.
- (DASH) – When selecting a digital channel
directly, use this button for the separation of
main and sub-channels. For example,
channel 28-2 would be selected by the button sequence 2 8 – 2.