Vizio VP422 HDTV10A Flat Panel Television User Manual


 
VIZIO VP422 HDTV10A User Manual
Version 5/29/2008 63
www.VIZIO.com
4.18
4.184.18
4.18 Using a Cable or Satellite Remote
Using a Cable or Satellite RemoteUsing a Cable or Satellite Remote
Using a Cable or Satellite Remote
Your VIZIO remote uses codes 11758 and 10178 to work your PLASMA HDTV. To use a cable or
satellite remote to work the PLASMA HDTV, refer to your cable or satellite remote user guide for more
information on how to program the remote. If your cable or satellite remote uses a 5-digit code (like most
Direct TV units), first try 11758 and then, if that does not work, 10178. If your cable or satellite remote
uses a 4-digit code, try 1758 and then 0178 as an alternative. If your cable or satellite remote uses a 3-
digit code (Echostar or Dish Network for example), use code 627.
Note: Some buttons may not function as expected on your cable or satellite remote. Typically power,
volume and mute will work.
Chapter 5
Chapter 5Chapter 5
Chapter 5 Maintenance
MaintenanceMaintenance
Maintenance and Troubleshooting
and Troubleshooting and Troubleshooting
and Troubleshooting
5.1
5.15.1
5.1 Maintenance
MaintenanceMaintenance
Maintenance
Impor
ImporImpor
Important
tanttant
tant
1. Make sure that the power cable is removed from the socket before cleaning the TV.
2. Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such
chemicals may damage the housing, screen glass and remote control, and cause paint to
peel.
Cleaning the Housing and Remote Control
Cleaning the Housing and Remote ControlCleaning the Housing and Remote Control
Cleaning the Housing and Remote Control
1. Use a soft cloth for cleaning.
2. If the housing or remote control is seriously contaminated, use a soft cloth moistened with
diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to
prevent water from penetrating into the housing. Wipe the display with a dry cloth after
cleaning.
Cleaning the Screen
Cleaning the ScreenCleaning the Screen
Cleaning the Screen
1. Use a soft cotton cloth to gently clean the screen.
2. The screen glass is very fragile. Do not scrape it with any sharp object. Do not press or tap
the screen to avoid cracking. When the screen is seriously contaminated, use a soft cloth
moistened with diluted neutral cleaner to clean the display. Wring water out of the cloth
before cleaning to prevent water from penetrating into the housing. Wipe the display with a
dry cloth after cleaning.