Filter
Top Products
VIZIO VP422 HDTV10A User Manual
Version 5/29/2008 5
www.VIZIO.com
Additional Certified Accessories
Additional Certified AccessoriesAdditional Certified Accessories
Additional Certified Accessories for the VIZIO
for the VIZIO for the VIZIO
for the VIZIO
VP422 HDTV10A are sold separately
VP422 HDTV10A are sold separatelyVP422 HDTV10A are sold separately
VP422 HDTV10A are sold separately
Wall Mounts
High Definition Cables
Extra or replacement Remote
VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VP422 HDTV10A
To purchase or inquire about additional accessories and services for your VIZIO product, visit our web
site at www.VIZIO.com or call us toll free at 888-VIZIOCE (888-849-4623)
Installation Preparation
Installation PreparationInstallation Preparation
Installation Preparation
Please read this user manual carefully before installing your VIZIO HDTV.
The power consumption of the High Definition TV is about 350W, please use the power cord designated
for TV. When an extension cord is required, use one with the correct power rating. The cord must be
grounded and the grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space
between the back of the High Definition TV and the wall. If you would like to mount your TV on the wall,
please see below ‘Preparing Your PLASMA HDTV for Wall Mounting’ for additional information. Avoid
installing the TV in places with high humidity, dust or smoke so as not to shorten the service life of the
electronic components.
Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Please contact VIZIO for more information on these
services at 888-VIZIOCE (888-849-4623) or www.VIZIO.com.
Attaching the Safety Strap
Attaching the Safety StrapAttaching the Safety Strap
Attaching the Safety Strap
For when the VP422 HDTV10A is not mounted on the wall with a Wall Mount, a Safety Strap has been
included to attach the HDTV to the wall to reduce the chance of the HDTV being pulled over. The Safety
Strap should be used with common sense practice such as ensuring that children (or adults) do not climb
up, grabbing the top of the HDTV and pulling it onto themselves.
1. Fix one end of the strap to the wall. If you have a drywall
finish it is preferable to fix it to a stud, using a washer
underneath the screw head. If you have a solid wall you
should use a lag bolt, again using a washer under the nut.
2. Fix the other end of the Safety
Strap to one of the upper wall
mounting holes on the back of
the HDTV, using a washer
under the screw head.