Filter
Top Products
WB-31
Page 10 Installation Instructions
Adapter Plate Installation
NOTE: If your flat panel is not a VESA 75/100, the 200x200 or the 100x200 Adapter Plates must be used.
100x200 Aapter Plate
1. Attach the 100x200 Adapter Plate to the back of the display using the provided hardware
(see Parts List, page 4).
2. Attach the WB-31 mounting plate to the back of the 100x200 using the M4 x 5 mm screws.
200x200 Aapter Plate
3. Figure 9B: Attach the 200x200 Adapter Plate to the back of the display using the provided
hardware (see Parts List, page 4).
4. Attach the WB-31 mounting plate to the back of the 200x200, or the 100x200 using the
M4 x 5 mm screws.
CAUTION
: DO NOT OVERTIGHTEN THE SCREWS.
Mounting Hardware (Please refer to Page 4
for the correct mounting hardware that will
be used with your display.
Figure 9A
Figure 9B
200x200
Display
Display
100x200
Mounting Hardware (Please refer to Page 4
for the correct mounting hardware that will
be used with your display.