Filter
Top Products
WB-31
Page 4 Installation Instructions
Parts List
NOTE: This mount is shipped with all intallation hardware and components. Make sure that none
of these parts are missing and/ or damaged before beginning installation. If there are parts
missing and/or damaged, please stop and contact
TOA Electronics, Inc.
Installation Tools
Phillips Head Screw Driver Soft Material/ Blanket 1/2" Socket and Wrench Pencil
Tape Measure Drill Gun Level (Supplied)
14mm Socket (Supplied) Ratchet with 9/16” Drive Socket
M3 Allen Wrench (Supplied) Stud Finder (Commercially Available)
Swingout Arm (Qty 1)
1/4” Wedge Anchors
(Qty 4). These are used only
for concrete installations.
Mounting Backplate (Qty 1)
M6 x 35mm Set Screw
(Qty 1)
#14 x 2” Wood Screw
(Qty 4)
M4 x 10mm Phillips Head
Scews (Qty 4)
200x200 Adapter Plate
(Qty 1)
M4 x 16mm SEMS
Phillips Pan Head
Screw (Qty 4)
200x200 ADAPTER HARDWARE
M6 x 30mm Phillips Pan
Head Screws (Qty 4)
M6 x 20mm Phillips Pan
Head Screws (Qty 4)
M6 x 12mm Phillips Pan Head
Screws (Qty 4)
M5 x 16mm Phillips Pan
Head Screws (Qty 4)
M5 x 12mm Phillips Pan
Head Screws (Qty 4)
M4 x 20mm Phillips Pan
Head Screws (Qty 4)
M5 Flat
Washer (Qty 4)
M4 Flat
Washer (Qty 4)
100x200 Adapter Plate
(Qty 1)
M4 x 5mm Phillips Pan Head
Screws (Qty 4)
M4 x 6mm Phillips Pan Head
Screws (Qty 4)
M4 x 10mm Phillips Flat
Head Screws (Qty 6)
100x200 ADAPTER HARDWARE