Filter
Top Products
UNITY 4600 USER’S MANUAL
www.wegener.com 41 800032-01 Rev.F
RP group
group: Indicates group of parameters to report, as follows:
AUD - Audio service diagnos.
AW - Alarm/Warning status
CA - Conditional Access diagnostics
DPI - Conditional Digital Program Insertion (DPI)
GL - Genlock system (if installed and applicable)
LAN - IP/Ethernet diagnostics
NTW - COMPEL
network control diagnostics
PRGMP - Program mapping at ASI output
MSC - Miscellaneous diagnostics
REC - Automated Recovery status
RF - Carrier Acquisition/Tracking diagnostics
RPA - Return Path diagnostics
SW - Software download/self-test status
TS - Transport Stream diagnostics
VID - Video service diagnostics
Expanded report on unit NV operating parameters. A Local Control Command (available from the terminal
regardless of "Local Control Enable/Disable" commands from the network).
RESET
Resets unit. A Local Control Command (available from the terminal regardless of "Local Control Enable/
Disable" commands from the network).
RPATH
Command to display all return path non-volatile settings. A Local Control Command (available from the
terminal regardless of "Local Control Enable/Disable" commands from the network). A Local Control
Command (available from the terminal regardless of "Local Control Enable/Disable" commands from the
network).
RPATH FROM domain
domain: Legal string of keyboard characters in proper domain-name format (e.g.,
string1.string2.string3…)
Domain name portion of “from” email address in Return Path reporting. A Local Control Command
(available from the terminal regardless of "Local Control Enable/Disable" commands from the network).
RPATH RELAY addr
addr: IP address formatted as n1:n2:n3:n4 where nn1, n2, n3, and n4 are integers between 0 and
255.
IP address of local Mail Relay server, if any. A Local Control Command (available from the terminal
regardless of "Local Control Enable/Disable" commands from the network).
RPATH SEND
Command ordering IRD to immediately send a Return Path report. A Local Control Command (available
from the terminal regardless of "Local Control Enable/Disable" commands from the network).
Table 3.3: Command Directory for U4600 Terminal Commands